I’ve learned about them in school, but I’ve never heard anyone say something is 8 decameters long or anything like that. I’m an American.
Yes, they are used, but typically in specialized applications which is why you don’t see them every day.
They are “technically correct” measurements since they are a valid prefix, and could be used if you wanted. but they are very infrequently used in any industry. Since most of the time measurements are better served by higher precision (just using Meters) or need no precision at all over long distance (switch to kilometers), no need for excess measurement types unless necessary
No, some measurements just aren’t used, even when they’d be a good fit.
Like lengths. We never use anything above km. Even for things like space, we say “million km” rather than gigametre.
The closest we come to hectometre is hectare, which is used for land area.
I’d say we use every 3 prefixes, nanometerw, micrometers, mm, m, km, than any much higher than that usually uses space units (parsecs, AU, lightyears, etc.)
Megameters are sometimes used, that’s not true.
Where do you live and what is your profession? I have heard anyone use megameter seriously.
My astrophysicist friend used them sometimes. I knew her in Texas. She’s moved around tho
Germany, studying Cybersecurity. They are used in astronomy through, only a hobby if me.
Who uses megametres? It’s not something I’ve ever heard in the UK.
A megameters is 1.000.000 meters.
In Italy we use hectograms (“ettogrammi”, “etti” for short) in day to day life when buying groceries. You don’t ask for 200 grams of ham, you just ask for 2 etti.
Thinking how I always order deli meat in units of 100 grams, feels dumb we don’t do that in Canada too
Yeah I don’t think it’s very common elsewhere. Right over the border with France they were already saying “200 grams de jambon”.
But I think it’s convenient. Small number make brain hurt less, brain no need to think.
In Romania we use them for measuring areas. An “ar” is 100m^2 or a square decameter, and a hectare is a 10000m^2 or a square hectometer.
In Germany we only use hectare. Ar is something you learn in school and never use.
We use litres, which is one decimetre cubed. We use hectares, which is one hectometre squared. But the beauty of it is, that you can just convert everything to units that are more widely understood.
-
1 decimetre = 10 centimetres = .1 metres
-
1 hectometre = 100 metres = .1 kilometre
Hektoliter is common in Germany for measuring quantities of beer (not a single serving, of course, but when buying beer for some kind of venue or measuring the output of a brewery)
-
Valid, but rarely used, as it’s usually just as fast to say “two hundred meters” instead of “two hecto meters”.
However, those prefixes have other (non-SI) uses. A hectare is common way of referring to a 100x100 meter area. And a decare is 10 ares, i.e. 0.1 hectare.
Also: hectopascals.
To be fair, once all the boomers are gone we’re probably going to go full kPa.
From my experience in Norway, these are typical in context of daily speech:
Weight (gram): tonne (a substitute name for Mg (Mega)), kg, hg, g, mg, μg (mostly in medicine)
Distance (meter): mil (10 km), km, m, dm (kinda rare), cm, mm
Volume (liter): l, dl, cl, ml
In my experience, the deca-predix is very rarely used. Most of the missing prefixes are just substituted for numbers, i.e. saying “a thousand kilometers” is much more common that “a megameter”. Of course, this differs depending on context, as a lot of the prefixes become more common within scientific fields where the sizes are common.
On a separate note, even the numbers can be a bit inconsistent. It has bothered me that it’s often common to say “a thousand milliard” instead of “one billion” (also note that we use the long scale).
In Germany Hectoliter is also used to calculate beer volume in commercial settings, like planning for a bar or a festival.
From my experience in Norway, these are typical in context of daily speech: (…) km, m, dm (kinda rare), cm, mm
Don’t forget the Scandinavian mile! You and the Swedes use it all the time.
Not sure how I forgot that! Will edit it in!
μm and nm used in engineering and science fields fairly frequently
Czech republic here: decagram used to weight ham, bacon 🥓 or salami. Usually as “deka” without the gram.
I can only tell you about how we do it here in the Netherlands, but very rarely.
We have highway location markers (in the form of a little pole and a sign with some markings on them) every hundred meters. Their official name is “afstandspaal” but people generally call them “hectometerpaal” because they denote the distance along a highway in hectometers.
When you hear about traffic jams, speed cameras, or car accidents on the radio, they’ll usually announce highway number and hectometer pole number so drivers know where to look.
The metric tonne (1000kg) is used rather than a megagram even though megagram is more fun to say. This is for historic reasons, mostly. Having Mg (megagrams) and mg (milligrams) next to each other would probably also just confuse people.
Hectares (100x100m, or 10000m²) are used to denote area for things like farms. Centiliters and deciliters are used for very specific purposes (medical and such).
As for general distance: meters and kilometers work fine. Same with grams and kilograms. Smaller measurements like centimeters and millimeters are also common (or milliliters and liters, rarely centiliters but you do see them in some recipes).
Funnily enough, we (although I notice it mostly among older people) do use ons and pond (ounce and pound), although an ons is 100 grams and a pond is 500 grams. Just like with the tonne, we adjusted them to make dealing with SI units easier; we did the same with the mijl (mile) and other units similar to the imperial name as a transition to the normal metric system. Technically speaking, you’re not allowed to sell advertise products by the ons or pond anymore (thanks, IJkwet of 1937) but if you ask anyone at market for a pound if cheese, they’ll know how much to get you.
Lastly, there are a few use cases where the inch is used. Screens are measured in inches for reasons I’m not entirely sure about (probably British and American exports). This leads to some rather silly phone spec sheets, listing width/length/height in centimeters and a screen diagonal in inches. We don’t even use a Dutch word for inch!
We do have a perfectly good word for inch : duim (thumb)
Perhaps, but I’ve never heard anyone say they have a 60 duim TV.
I’m all for some Bond tegen Leenwoorden changes to bring duimen back to the masses, but I don’t think it’s going to happen.
Dekametre and hectometre, rarely. Mostly mm, cm, m, km.
In Europe, hg is relatively common, whereas in Canada, prices for deli products are “per 100 g” instead of per hg.
Also in Europe, cl and dl are common in recipes and bottles of alcohol, but in Canada, almost uniquely mL and L. (And yes, lowercase litre in Europe, but uppercase Litre in Canada, although that’s gradually changing.)
I’m American, but follow mostly Europeans and Canadians online and use metrics in my own head just because it makes more sense.
I gather that the deca-/deka- and hecto- (along with a few other) prefixes are similar to imperial furlongs, leagues, stones, barrels, kegs, and hogsheads: They exist, but no one uses them outside of very specialized circumstances.
deleted by creator
“Similar” = “not exactly”
Your point?
I think the point op is making is with ‘stones’ or ‘furlongs’ etc you need to already know what that unit represents to make sense of it.
With metric units, even the infrequently used increments can be reasoned out just from the name of the unit, as it’s a standard prefix in fixed multiples of 10, not a random number that must be learnt.
So they’re neither similar or exactly the same in principle really.
In fairness, you also need to already know what grams, meters, and seconds represent. And the prefixes are hardly self-explanatory. You’d still have to look up the unfamiliar ones. Just like you have to look up nautical miles or knots.
Well with metric there are alot less words you need to know to use them I think is the point of difference.
Like you need to know that a stone represents a weight, and that that weight is 14 pounds. What’s a pound? Oh it’s 12 ounces. None of those words are the same out of context but all describe a weight and the size of the weight.
In metric you only need to know that grams measure weight, metres length, litres volume. Then everyday use is normal prefix increments like OP said.
And again the prefixes apply consistently across units too, so a millimetre, a millilitre or a milligram will all be the same fraction of their base.
It seems that we’re both fans of SI units. I’m not arguing against metrics. But you still have to know what the words mean, and to do that, you have to look them up. You can also look up deebles if necessary.
And not to pick nits, but grams measure mass, not weight. Weight is newtons. A pound is 16 ounces, not 12. A lot of the measures, such as weights and volumes, use powers of two: 2, 4, 8, 16, 32, 63, 128.
It’s easy to get imperials confused. That’s why I’d rather call a pound about a half kilo in my head and be done with it.
Haha, I promise I didn’t intentionally make my point about how obscure imperial units are in conversion. I looked it up but clearly transcribed wrong!
In France “hectare” (10 000m²) is used for fields and burning forest. Beside that deca or hectometers are never used
An hectare is 10.000 m2
And we use hectolitres for wine production











