Here’s a link to a non pay walled source. https://www.c-span.org/video/?532724-1/supreme-ct-hears-case-fmr-pres-trumps-colorado-ballot-eligibility&live

Brother lasers are pretty great.

With those symptoms (dying under load and takes an hour to turn back on) I would put it at a 90% chance this is a thermal issue with the video card. Have you made sure the GPU fans spin when under load? If they aren’t spinning that’s going to be your problem. If they are, how dirty is the heat sink and has that ever been cleaned? If you have pets and live in a place with carpet or a smoker you will get buildup in the heat sink that can kill airflow. With this card only being ~4 years old at most, I wouldn’t expect the thermal paste to be an issue but it wouldn’t hurt to replace it.

I just got 2 of these (x22 version) for my Jellyfin. Supposed to be here tomorrow! I don’t think I could drop $1k for that many.

Some things I would double-check:

• Make sure only the correct mb standoffs are installed and all of the correct standoffs are installed and used. Looks like there is an unused mount in one of your pictures.
• Make sure all power connections on the mb are made (there are more than just the 24 pin).
• If using a modular power supply, make sure you have the wires plugged into the correct plugs on the ps. Pcie cables might fit into the mb aux or SATA connector plugs.
• Final step is taking everything out and installing the minimum viable components. So one stick ram, no expansion cards, only boot drive, etc.

This happens to my wife’s smaller one (maybe 6 cup) every few months. Generally the gasket is the primary issue and the second issue is she doesn’t tighten the 2 halves together very well.

https://web.archive.org/web/20231122232302/https://www.thedailybeast.com/conservative-group-accidentally-reveals-its-secret-donors-some-of-them-are-liberal-orgs

For those who want to read it.